We also offer product data services for Electrical Manufacturers

visit: www.dataZenEngineering.com

©2018 MIRA by dataZen Engineering ®

  • Grey Twitter Icon

OPC Server

OPC is implemented in client/server pairs. The OPC server is a software program that converts the communication protocol used by a PLC into the OPC protocol. The OPC client software is any program that needs to connect to the OPC Server. The OPC client uses the OPC server to get data from or send commands to the control. The goal of the OPC specification is to provide an open, flexible, plug-and-play software standard for software interoperability.The  is a custom-engineered MIRA OPC Server software server application that allows communication with Okuma Legacy Machinery

Recent Comments

Address:
5 West Hargett Street, Suite 200 Raleigh, NC 27601, USA

 

Phone:
(919) 526-1018

 

E-Mail:
support@miraApps
.com

Bringing people, machines and processes togerher on the shop floor

(supporting DNC-T3) and modern P100 II/P200/P300 etc. machines to get data from or send commands to the control.

Fig-1 shows a typical implementation

MIRA Connector is a server application that runs on the Okuma machine control which helps to collect data from P100II/P200/P300 controls through THINC API. Once MIRA connector application is started, it may take up to 40 seconds to initialize entire THINC API and update the OPC server application UI. Navigate to “http ://{ Machine’s “IP-address”}:7000/” to view a landing page containing a list of items loaded at a certain instance. Fig-2 describes a screen of MIRA Connector

Fig-1

Fig-2

Data Points seen from a generic OPC Client. MIRA OPC Server works with Kepware Technologies. New!

1.72 MB

OPC KEPServerEX 5 Configuration

Configuration User Guide

For application Information about OPC Server and MIRA Connector, please contact MIRA APPS team by telephone or email.